ICG-2510W(G)-LTE Series User Manual

Table Of Contents
33
4.3. Management and Configuration
The Industrial Cellular Gateway offers management features that allow users to manage the Industrial Cellular
Gateway from anywhere on the network through a standard browser such as Microsoft Internet Explorer. After you set
up your IP address for the cellular gateway, you can access the Industrial Cellular Gateway's Web interface
applications directly in your Web browser by entering the IP address of the Industrial Cellular Gateway.
4.3.1. Setting
The Setup screen is the first screen users will see when accessing the cellular gateway. Most users will be able to
configure the gateway and get it work properly using only the settings on this screen. Some Internet Service Providers
(ISPs) will require users to enter specific information, such as User Name, Password, IP Address, Default Gateway
Address, or DNS IP Address. This information can be obtained from your ISP, if required.
4.3.1.1. Basic Setting
WAN Connection Type
The connection types include Disabled, Static IP, Automatic Configuration-DHCP, dhcp-4G, PPPoE, 3G Link1, 3G
Link2 and dhcp-bkup4G.
Disabled
Forbid the setting of WAN port connection type.
Static IP