ICG-2510W(G)-LTE Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. CELLULAR GATEWAY MANAGEMENT
- 4. WEB CONFIGURATION
- 5. APPENDIX A RJ45 Pin Assignments
26
Step 2: Place the bottom of DIN-rail bracket lightly into the track.
Step 3: Check whether the DIN-rail bracket is tightly on the track.
Step 4: Please refer to the following procedures to remove the Industrial Cellular Gateway from the track.
Step 5: Lightly pull out the bottom of DIN-rail bracket to remove it from the track.