ICG-2510W(G)-LTE Series User Manual

16
1.5. Product Specifications
Product ICG-2510W-LTE ICG-2510WG-LTE
Hardware Specifications
Copper Ports
4 LAN 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
1 WAN 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
Serial Interface
DB9 to RJ45 serial console port
 TCP/UDP PAD mode
 Modbus (ASCII, DTU, variable)
 PPP
 Reverse Telnet
SIM Interface
2 SIM card slots with mini SIM card tray
Cellular Antenna
2 5dBi external antennas with SMA connectors for LTE
Wi-Fi Antenna
1 1dBi (2.4~2.5G)/3dBi (5.15~5.85G) external antenna with RP-SMA-
J connector
for dual-band Wi-Fi
GPS Antenna -
1 28dB gain external antennas with
SMA connectors - 3m
DI & DO Interfaces
 2 Digital Input (DI)
 1 Digital Output (DO)
 1 Relay
Input ON Voltage: DC 5 -30 V
Input OFF Voltage: DC 0-3 V
Output < 50mA@DC 30V
Relay: AC 250V/DC 30V, 1A
Connector
1 removable 2-pin terminal block for power input
2 removable 3-pin terminal block for DI/DO and relay interface
Storage
1 MicroSD (TF) slot for saving serial port data
Switch Architecture
Store-and-Forward
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Reset Button
< 15 sec: Factory default
Surge Protection
1.5KV DC
ESD Protection
15KV DC
Enclosure
IP30 metal case
Installation
DIN rail, desktop
LED
System:
PWR (Blue)
SYS (Blue)
Wireless Interface :
WiFi Active (Blue)
Ethernet Interfaces (Port1-4 and WAN Port):