ICG-2510W-Series User Manual

87
Object –Serial
Applications
Description
Baudrate
Baud rate indicates the number of bytes per second transported by
device, commonly used baud rate is115200, 57600, 38400, and 19200.
Databit
The data bits can be 4, 5, 6, 7, 8, constitute a character. The ASCII code
is usually used. Starting from the most significant bit is transmitted.
Stopbit It marks the end of a character data. It is a high level of 1, 1.5, and 2.
Parity Use a set of data to check the data error.
Flow control Including the hardware part and software part in two ways.
Protocol
The protocol type for transmitting data.
UDP (DTU): Data transmission in UDP protocol works as an IP MODEM
device which has application protocol.
Pure UDP: Data transmission in standard UDP protocol.
TCP (DTU): Data transmission with TCP protocol works as an IP
MODEM device which has application protocol.
Pure TCP: Data transmission in standard TCP protocol, Router is the
client.
TCP Server: Data transmission in standard TCP protocol, Router is the
server.
TCST: Data transmission in TCP protocol that uses a custom data
Server Address The data service center’s IP Address or domain name.
Server Port The data service center’s listening port.
Device ID The Router’s identity ID.
Device Number The Router’s phone number.
Heartbeat
Interval
The time interval to send heart beat packet. This item is valid only when
you choose UDP (DTU) or TCP (DTU) protocol type.
TCP Server
Listen Port
This item is valid when Protocol Type is “TCP Server”.
Custom
Heartbeat Packet
This item is valid when Protocol Type is “TCST”.
Custom
Registration
Packet
This item is valid when Protocol Type is “TCST”.
4.3.10. Admin