ICG-2510W-Series User Manual

Table Of Contents
69
TUN MTU Setting Set MTU value of the tunnel
TLS Auth Key Authority key of Transport Layer Security
Additional
Config
Additional configurations of OPENVPN server
Policy based
Routing
Input some defined routing policy
CA Cert CA certificate
Public Client
Cert
Client certificate
Private Client
Key
Client key
4.3.4.4. IPSEC
Connect Status and Control
Show IPSEC connection and status of current router on IPSEC page.
Object – IPSEC Description
NAME The name of IPSEC connection
Type The type and function of current IPSEC connection
Common Name
Local subnet, local address, opposite end address and opposite end
subnet of current connection
Status
Closed: This connection does not launch a connection request to
opposite end
Negotiating: This connection launch a request to opposite end, is under
negotiating, the connection has not been established yet
Establish: The connection has been established, enabled to use this
tunnel
Action
The action of this connection, current is to delete, edit, reconnect and
enable.
Delete: To delete the connection, also will delete IPSEC if IPSEC has
set up
Edit: To edit the configure information of this connection, reload this
connection to make the configuration effect after edit