ICG-2510W-Series User Manual

51
Object – Port
Setup-Unbridged
Description
MTU Maximum transfer unit
Multicast
forwarding
Enable or disable multicast forwarding
Masquerade/NAT Enable or disable Masquerade/NAT
IP Address Set ra0's IP address, and do not conflict with other ports or bridge
Subnet Mask Set the port's subnet mask
Multiple DHCPDs
Using multiple DHCP service -- Click 'Add' in multiple DHCP servers to appear relevant configuration. The first means
the name of port or bridge (do not be configured as eth0), the second means whether to on DHCP. Start means start
address. Max means maximum assigned DHCP clients. Lease time means the client lease time. The unit is second.
Click 'Save' or 'Apply' to put it into effect after setting.
Only configure and click 'Save' to configure the next; configuring multiple DHCPs at the same time
is not possible.