ICG-2510W-Series User Manual

Table Of Contents
50
Prio means priority level: work if multiple ports are within the same bridge. The smaller the number gets, the higher the
level is.
Click 'Add' to take effect.
The corresponding interfaces of WAN ports should not be bound; this bridge function is basically
used for LAN port, and should not be bound with WAN port
If binding is successful, bridge binding list in the list of current bridging table is shown below:
To make br1 bridge have the same function with DHCP assigned address, users need to set multiple DHCP functions.
See the introduction of multi-channel DHCPD:
Port Setup
Set the port properly; the default is not set
When “Unbridged” is selected, the configuration is shown below.