ICG-2510W-Series User Manual

25
2.2. Mounting Installation
This section describes how to install your Industrial Cellular Gateway and make connections to the Industrial Cellular
Gateway. Please read the following sections and perform the procedures in the order being presented. To install your
Industrial Cellular Gateway on a desktop or shelf, simply complete the following steps.
2.2.1. DIN-rail Mounting
The DIN-rail is screwed on the Industrial Cellular Gateway when out of factory. Please refer to the following figures to
screw the DIN-rail on the Industrial Cellular Gateway. To hang the Industrial Cellular Gateway, follow the steps below:
Step 1: Screw the DIN-rail bracket on the Industrial Cellular Gateway.