ICG-2510W-Series User Manual

20
 Reset Button
On the front of the ICG-2510W(G)-LTE series, the reset button is designed to reboot the Industrial Cellular Gateway
without turning off and on the power. The following is the summary table of the reset button functions:
Figure 2-3 Rest Button of ICG-2510W(G)-LTE Series
Reset Button Pressed and Released
Function
> 15 sec: Factory Default
Reset the Industrial Cellular Gateway to Factory Default
configuration. Industrial Cellular Gateway will then reboot and
load the default settings shown below:
。 Default username: admin
。 Default password: admin
。 Default IP address: 192.168.1.1
。
Subnet mask: 255.255.255.0
2.1.2. LED Indications
The front panel LEDs indicate instant status of port links, data activity and system power; it helps monitor and
troubleshoot when needed.
 System
LED
Color
Function
PWR Blue
Lights
Indicates the system is powered on.
Off
Indicates the system is powered off.
SYS Blue
Blinking
Indicates the system works properly.
Off
Indicates the system does not work.
Wi-Fi Blue
Lights
Indicates the Wi-Fi is active.
Off
Indicates the Wi-Fi is not active.
LTE Signal
(L)
Blue Lights Indicates the signal is low.
LTE Signal
(H)
Blue Lights Indicates the signal is normal or high.
SIM1 & 2 Blue
Lights
Indicates the SIM1 or SIM2 is connecting successfully.
Off
Indicates the SIM1 or SIM2 is connecting unsuccessfully or no
SIM card inserted.