ICG-2510W-Series User Manual

14
1.4. Product Features
 Benefits
■ Dual module SIMs for network load balancing and redundancy
■ Wi-Fi compliant IEEE 802.11b/g/n/ac dual-band for mobile client connectivity
■ 5-port Gigabit Ethernet, built-in redundant VRRP protocol
■ 2 DI, 1 DO and 1 serial console port (RS232 or RS485) for Modbus applications
■ Multiple VPNs with IPSEC, OpenVPN, RRTP, L2TP, GRE and VPN Failover
■ Full security with VLAN, NAT, DMZ, static routing, firewall and IP/MAC/port filtering
■ Supports CMS for remote management
■ -35 to 75 degrees C operating temperature and fanless design
■ GPS antenna allows to detect the location via sat nav system (for ICG-2510WG-LTE only)
 Physical Port
■ Four 10/100/1000BASE-T RJ45 LAN ports, auto-negotiation, auto MDI/MDI-X
■ One 10/100/1000BASE-T RJ45 WAN port, auto-negotiation, auto MDI/MDI-X
■ Two 4G LTE antennas
■ One 2.4G/5G WiFi antenna
■ Two SIM card slots
■ One GPS antenna ( for ICG-2510WG-LTE )
■ One serial console port ( RS232 or RS485)
■ One reset button
■ One MicroSD slot to save files for serial port data
 Cellular Interface
■ Supports multi-band connectivity with FDD LTE/ TDD LTE/ WCDMA/ GSM/ LTE Cat4
■ Supports failover and load band lancing
■ Built-in SIM and broadband backup for network redundancy
■ Two detachable antennas for 4G LTE connection
■ LED indicators for signal strength and connection status
 Wi-Fi Interface
■ Complies with IEEE 802.11b/g/n/ac 2.4/5GHz
■ Supports AP, Client, Repeater and Repeater Bridge modes
■ One detachable dual band antenna for wireless connection
■ 64/128-bit WEP, WPA/WPA2 with TKIP/AES encryption
■ LED indicator for connection status
 Industrial Case and Installation
■ IP30 metal case
■ DIN-rail/desktop design
■ Power requirement: 9~36V DC
■ Supports EFT protection for 1.5KV DC power and 15KV DC Ethernet ESD protection
■ -35 to 75 degrees C operating temperature
 Digital Input and Digital Output
■ 2 digital input (DI)
■ 1 digital output (DO)
■ 1 relay