User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
75
9.6 MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real-time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Picture 69 - Multicast Settings Page
Table 13 - MCAST Parameters on Web
Parameters Description
Normal Call Priority Define the priority of the active call, 1 is the highest priority, 10 is the lowest.
Enable Page Priority The voice call in progress takes precedence over all incoming paging calls.
Name Listened multicast server name
Host: port Listened multicast server’s multicast IP address and port.
Multicast
:
Go to web page of [Function Key] >> [Function Key], select the type to
multicast, set the multicast address, and select the codec.
Click Apply.
Set up the name, host and port of the receiving multicast on the web page of
[Phone Settings] >> [MCAST].
Press the DSSKEY of Multicast Key which you set.
Receiver will receive multicast call and play multicast automatically.