User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
58
Picture 48 – Web set Call Park
8.17 Pick Up
Pick-up requires server support. Consult your system administrator for support.
You can use the Pick Up function to answer incoming calls from other users. The phone
can pick up incoming calls by configuring DSSkey for BLF and setting the Pick Up code.
In standby mode, click the "unfold" button and long press an editable key to enter the
interface of function key setting. Set the function key type as memory key and the
subtype as BLF/NEW CALL, and set the corresponding SIP line. Finally fill in the grab
number.
Set the line, function key type as memory key, subtype as BLF/NEW CALL, set
subscription number, and pick up code
Other phones call the subscription number, and the opposite end is in the
incoming ring.
Press the DSS key to pick up the phone.
The caller picks up the call and speaks to it.
WEB interface: Log in the phone webpage, enter the [Function Key] >>
[Function Key] page, select a DSSkey, set the memory key type as memory key,
the subtype as BLF/NEW CALL, and set the corresponding SIP line and pick up
codes.