User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
57
Method to join a network conference:
Call the numbers of network conference and when they enter the password, it
will enter the conference room.
The two phones have established common calls. Press the conference button
to invite new members to the conference. Follow the voice prompt to operate.
Note: The upper limit of the number of participants in the network conference varies
according to the server.
8.16 Call Park
Call Park requires server support. Consult your system administrator for support.
When you are on the call, it is not convenient to answer the phone at this time, you can
press the configured park button to hold the call; After the Call Park is successful, you
can resume the call by pressing the configured park button on other devices.
Set the call park button：
Phone interface: In standby mode, click the unfold button and long press an editable
key to enter the function key setting interface. Set the function key type as memory
and subtype as call park and the value as the call park number of the server, and
set up corresponding SIP lines.
Web interface: Log in the phone page, enter the [Function Key] >> [Function Key]
page, select a DSSkey, set the function key type as memory key, the subtype as call
park, and the value as the call park number of the server, and set the corresponding
SIP line.
Picture 47 - Phone set Call Park