User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
45
8.11 DND
User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls
(including call waiting). The DND can be enabled on line basis.
Enable/Disable phone all lines DND, Methods the following：
Phone interface: Default standby mode，
1) Press [DND] button to enter the DND setting interface. Select line or phone to
enable DND and the icon will become red
. The phone status prompt bar
will have a DND icon.
2) Press [DND] button to enter the DND setting interface and disable DND. The
icon will be become blue
. DND icon in phone status prompt bar
disappears.
Picture 28 - Enable DND
If the user wishes to enable/disable the uninterrupted function on a specific line, the user
can set the uninterrupted function on the page of configuring the line.
1) Press [Phone Settings] >> [Call] >> [DND] button. Enter the [DND] editing
interface.
2) Click the left/right navigation button to select the line to adjust the mode and
state of "do not disturb", and then press the [OK] button to save.
3) The user will see the DND icon turn red, and the sip-line has enabled the mode
of "DND".