User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
130
hidden as *, N stands for the value which you enter in
the Password Length field. For example: you set the
password prefix is 3, enter the Password Length is 2,
then you enter the number 34567, it will display 3**67
on the phone.
Encryption Number Length Configure the Encryption Number length
Password Dial Prefix Configure the prefix of the password call number
Power LED
Common
Standby power lamp state, off when off, open is
always bright red. Off by default.
SMS/MWI
The status of power lamp when there is unread short
message/voice message, including off/on/slow
flash/quick flash, default slow flash.
Missed
The state of the power lamp when there is a missed
call, including off/on/slow flash/quick flash, the default
slow flash.
Talk/Dial
In the talk/dial state, the power lamp state, off is off,
on is always red bright, the default is off.
Ringing
Power lamp status when there is an incoming call,
including off/on/slow flash/quick flash, default flash.
Mute
Power lamp status in mute mode, including
off/on/slow flash/quick flash, off by default.
Hold/Held
The power lamp state, including off/on/slow
flash/quick flash, is turned
off by default when
left/retained.
Notification Popups
Display Missed Call Popup
No incoming call popup prompt after opening, no
popup prompt when closing, open by default.
Display MWI Popup
Voice message popup prompt is not answered after
opening, and it is opened by default if there is no
popup prompt when closing.
Display Device Connect Popup
There is a popup prompt when the WIFI adapter is
connected. There is no popup prompt when the WIFI
adapter is closed. It is on by default.