User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Phone settings >> Features
- 12.9 Phone settings >> Media Settings
- 12.10 Phone settings >> MCAST
- 12.11 Phone settings >> Action
- 12.12 Phone settings >> Time/Date
- 12.13 Phone settings >> Tone
- 12.14 Phone settings >> Advanced
- 12.15 Phonebook >> Contact
- 12.16 Phonebook >> Cloud phonebook
- 12.17 Phonebook >> Call List
- 12.18 Phonebook >> Web Dial
- 12.19 Phonebook >> Advanced
- 12.20 Call Logs
- 12.21 Function Key >> Function Key
- 12.22 Function Key >> Softkey
- 12.23 Function Key >> Advanced
- 12.24 Application >> Manage Recording
- 12.25 Security >> Web Filter
- 12.26 Security >> Trust Certificates
- 12.27 Security >> Device Certificates
- 12.28 Security >> Firewall
- 12.29 Device Log >> Device Log
- 13 Trouble Shooting
High Definition Touch Color Screen Smart Media Android SIP Conference Phone
ICF-1900
90
10.1.3 Screen
The user can adjust the brightness of phone screen in LCD in two ways.
Slide down the outgoing status bar page in standby mode. Slide down again to
adjust phone brightness conveniently.
Enter the [Settings] >> [System]>> [Display], and then adjust the brightness.
Picture 85 - Set screen parameters on phone
10.1.3.1 Brightness and backlight
Phone interface:
1) in standby mode, slide from the top edge of the screen to enter the status bar;Sliding down
again makes it easy to set the brightness of the device.
2) the phone enters >> [setting] >> [display], which can adjust the brightness and change the
wallpaper.
10.1.3.2 Screen Saver
When the phone is in default standby state, press the function menu [Phone
settings]>> [System] >> [Display] >> [Screen Security] to enable the screen
protection, as shown in the figure below: