User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
79
As a result, NVR can always find the IP camera regardless of frequently changing IP address
of the camera. Since there are so many public DDNS Services available, the PPPoE-based
connection is really a good and low-cost solution for single-camera sites.
To activate DDNS, please select the service, such as Easy DDNS or PLANET DDNS.
Parameters
Description
Disabled
Disable the DDNS function.
Easy DDNS
When the function is enabled, it will appear a host name automatically.
User does not need to register an account or host name for your camera.
PLANET
DDNS
Please visit http://planetddns.com and register an account if user does not
have one yet. User will get the needed Host Name, User Name and
Password information from the DDNS service provider
On Easy DDNS page, press Apply to save the changes.
The host name will appear automatically after few seconds.
Click IP Settings DDNS and the following page will be displayed.