User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
75
3.9 IP Settings
The IP Settings section provides the options to define how the camera would obtain its IP
address, and to which DNS server should the camera connect, in order to resolve domain
names.
3.9.1 Connection Type
The Connection Type allows defining the method of obtaining the IP address of the camera.
By default, the camera is in Dynamic IP Address mode and attempts to get the IP address
from a DHCP server. If such attempt fails after several seconds (for example, the DHCP
server does not exist), the camera will automatically assign itself an IP address, listed under
the Static IP Address.