User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
72
3.8.7 Network
The Network section contains the controls for the following functions:
Type of Service
UPnP
Bonjour
ONVIF
Type of Service
The “Type of Service” provides 4 options to define the priorities of how the data from the
camera should be handled by the routers that support ToS concept. By default, the ToS
priority is set as “Normal Service”.
For special priority arrangement, there are 3 more options:
Minimize Delay
Maximize Throughput
Maximize Reliability
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
UPnP
TM
The UPnP
TM
section provides the option to enable or disable the Universal Plug and Play
capability of the camera. Having the UPnP
TM
enabled allows the other network devices to
seamlessly discover it on the network for convenient identification and access.
The Friendly Name is a human-readable name for the device that will be displayed when the