User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
63
3.8 Network
The section Network provides the list of network related functions and services. The [+]
mark before Network indicates that the list can be expanded by clicking on it. Once expanded,
the list can later be collapsed again by clicking on the [-] mark.
3.8.1 IP Address Filtering
By “IP Address Filtering” function it is possible to define which devices (their IP addresses)
are allowed to connect to this camera, and which devices are forbidden to connect to this
camera.
Check the box “Enabled” to activate the IP address filtering function and press Apply.