User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
51
3.4.1.5 Focus Control:
After zooming the camera in or out, it is recommended to readjust the focus.
Parameters
Description
Auto Refocus
after Zoom:
Select this option to let the camera automatically adjust the focus after
zooming.
Manual
Select this option to manually adjust the focus.
This feature is useful if the automatic focus position is not the position that
the user wants to achieve. To adjust the focus manually, select the Step
Size and then click the step focus in or focus out icons until the desired
focus is achieved.
When an option is selected, click the Refocus button to apply the focus adjustment.
3.4.1.6 Move Limit:
Users can limit the movement of the camera from one point to another.
Parameters
Description
Position
To set the limit, do the following:
1. Click on the Position 1 text box, then pan and tilt the camera to the
starting target area of limitation, then click the to set that area as the