User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
45
- Full screen Mode
You may use ESC key from the keyboard to exit the full screen mode.
The cameras have the triple stream capability – Stream 1 is usually the high resolution
stream with the purpose of being recorded by NVR while Stream 2 and Stream 3 have
lighter video configuration for NVR live view purposes, to reduce the computing power
of the NVR PC. Both streams can be configured under web management’s Setup page.
To see how each of the streams looks like, there are quick buttons on the Live View
page:
- Show Stream 1 video
- Show Stream 2 video
- Show Stream 3 video
When pressing the Stream 2 button, the Live View would look like this:
To capture the snapshots of the current live view, press the snapshot button. The
snapshots are saved in the Picture folder.
- Take a Snapshot