User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
37
2.5 Setting Up ActiveX for the Camera
The camera web pages communicate with the camera using an ActiveX control. The ActiveX
control must be downloaded from the camera and installed on your PC. Your Internet
Explorer security settings must allow for the web page to work correctly. To use the camera,
user must set up his IE browser as follows:
2.5.1 Internet Explorer 6 for Windows XP
From your IE browse ”Tools” ”Internet Options…” ”Security” ”Custom Level…”,
please set up your “Settings” as follows:
Set the first 3 items
• Download the signed ActiveX controls
• Download the unsigned ActiveX controls
• Initialize and script the ActiveX controls not masked as safe to Prompt
2.5.2 Internet Explorer 7 for Windows XP
From your IE browser ”Tools” ”Internet Options…” ”Security” ”Custom Level…”,
please set up your “Settings” as follows:
1
2
3
4
5
6
7
8