User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
27
2.3 Initial Utility Installation
This chapter shows how to quickly set up the camera. The camera is with the default settings.
However, to help you find the camera quickly the windows utility PLANET Smart Discovery
Lite can search the cameras in the network that will help you to configure some basic
settings before you start advanced management and monitoring.
Step 1 Go to PLANET website and download the Smart Discovery Lite utility.
http://planet.com.tw/en/support/download.php?view=8184&key=ICA-E#list
Run Smart Discovery Lite utility to start searching for cameras.
If there are two LAN cards or above in the same administrator PC, choose a
different LAN card by using the “Select Adapter” tool.