User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
14
1.4 Product Specifications
Model
ICA-E6260
Camera
Image Device
1/2.8" 2 mega-pixel progressive scan CMOS Sensor
Lens
Auto-focal 4.5~148.5 mm/F1.6~5.0, auto-iris
Mechanical IR-cut filter
Angle of view: Horizontal: 3~69.3 degrees
Min. Illuminator
Color: 0.1 lux @ F1.6 (30 IRE, 2400°K)
B/W: 0.05 lux (30 IRE, 2400°K)
Effective Pixels
1920 x 1080 pixels
Horizontal Resolution
1800 TVL
Electronic Shutter
1/5~1/32000 sec.
S/N Ratio
56dB
Pan/Tilt / Zoom
Optical Zoom
33x
Digital Zoom
1~10x variable
Tele to Wide Speed
2.7 sec
Pan Degree
360 degrees endless
Tilt Degree
-20 ~ 200 degrees
Manual Panning Speed
3.2 ~ 72 degrees/sec.
Manual Tilting Speed
1.6 ~ 36 degrees/sec.
Preset Points
256
Preset Tours
10
Preset Panning Accuracy
0.265 degrees
Preset Tilting Accuracy
0.149 degrees
Preset Panning Speed
0.1~300 degrees/sec.
Preset Tilting Speed
0.1~150 degrees/sec.
Resume after Power loss
Yes
Auto scan
Yes
Protocol
Sony VISCA, Pelco D, Pelco P
Absolute Position
Yes
PTZ Auto Tracking
Yes