User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- 2.1 Physical Descriptions
- 2.2 Hardware Installation
- 2.3 Initial Utility Installation
- 2.4 Using UPnP of Windows XP or 7
- 2.5 Setting Up ActiveX for the Camera
- Chapter 3. Web-based Management
- Appendix A. The Dimensional Diagram of the Stand
- Appendix B. The Dimensional Diagram of the Camera
- Appendix C. Ping IP Address
- Appendix D. Configuring Port Forwarding Manually
- Appendix E. Waterproofing the Cable Connections
- Appendix F. Joystick Compatibility
- Appendix G. Connecting Audio Devices
- Appendix H. Connecting Digital Input/ Digital Output Devices
- Appendix I. How to Replace the Fuse
- Appendix J. Troubleshooting & Frequently Asked Questions
2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
124
Scan Failure
The scanning would fail if the disk is not recognized by the camera. Make sure that the disk
has been properly formatted and mounted to the camera.
3.12.3 File Management
The File Management submenu allows users to graphically see the amount of videos
recorded on the memory card through its timeline, as well as the type of triggers that may
have occurred during the recording.
Click a video timeslot from the timeline bar to select and view its snapshot. A selected video
timeslot is indicated by a blue bar.
Make sure to “format” the memory card first when using the card for the first time or
if the card has been used in other devices.