User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
Figure 8-54
Step 6: Set the linkage method as needed.
【
Linkage Method
】
refers to the response made by the device when an alarm event
occurs. The linkage includes “General Linkage”, “Upload Via SMTP” and “Upload Via
FTP”.
○
5E A People Gathering Detection
The people gathering detection function is used to detect that the density of the personnel
in the set area exceeds the set threshold, and the alarm is linked according to the
judgment result. The specific steps are as follows:
Step 1: In the main interface, click on the "Configuration → Events → Smart Event →
People Gathering Detection" to enter the People Gathering Detection settings interface,
as shown in Figure 8-55.
When the arming time is set, there can be no overlap between any two
time periods.