User's Manual

- Method 1: Click the arming time period, manually fill in the start time and end time, set
up and click Save. If you need to delete the time period, click the "Delete" button and
then reset the time period.
- Method 2: Click the time of deployment. The time period will display two circles at
both ends. Move the mouse to the circle to show the left and right direction of the
adjustment arrow, and move the adjustment arrow to adjust the arming time.
- You can set up more than one time period for up to 8 time periods.
- After the day of deployment time is set, if the other time is also needed to set the
same arming time, click the right side of the timeline "
" copy button. In the "copy
to" interface, check the "Select All" or a day, then Click "OK".
- After setting, click "Save" to complete the setting of the arming time.
Figure 8-50
Step 6: Set the linkage method as needed.
【
Linkage Method
】
refers to the response made by the device when an alarm event
occurs. The linkage includes “General Linkage”, “Upload Via SMTP” and “Upload Via
FTP”
 When the arming time is set, there can be no overlap between any two
time periods.