User's Manual

8.6.2 Smart Event
Smart event interface is to set face recognition, regional intrusion detection, cross border
detection, wandering detection and personnel aggregation detection.
○
1E A Face Recognition
The face recognition function is used to detect the face appearing in the face database in
the monitoring screen, and to perform frame selection tracking on the monitoring interface.
The specific steps are as follows:
Step 1: In the main interface click on the "Configuration → Events → Smart Event" to
enter the Face Recognition settings interface, as shown in Figure 8-45.
Figure 8-45
Step 2: Check "Enable" to enable face recognition.
Step 3: To set the arming area, move the mouse to the preview screen, hold down the left
mouse button to select the area of the face recognition, and release the left mouse button
to complete the area drawing.
【
Select all areas
】
is used to set all areas under the monitor screen as the guard area.
【
Delete Selection Area
】
is used to delete the selected alert area.
Step 4: To set related parameters, set the minimum face recognition pixel, open the face
tracking frame, turn on the OSD overlay, and set the face contrast recognition threshold.