User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
to" interface, check the "Select All" or a day, and then Click "OK".
- After setting, click "Save" to complete the setting of the arming time.
Figure 8-41
Linkage mode settings: The alarm linkage mode has general linkage and linkage alarm
output, as shown in Figure 8-42.
【
General Linkage
】
Including upload SMTP and upload FTP.
【
Upload Via SMTP
】
Select and the system is configured with SMTP, and the alarm
information will be sent to the SMTP recipient mailbox.
【
Upload Via FTP
】
Select and the system is configured with the FTP server, and will send
the alarm information to the FTP server.
【Linkage Alarm Output】 Including IO output.
【
IO Output
】
Be enabled and the device IO port is connected to the output alarm device.
When there is alarm input, the alarm device is connected with IO port that will make the
corresponding alarm activate.