User's Manual

Figure 8-40
Here to open the "General linkage", "Upload via FTP", "Upload via SMTP", "Upload via
Cloud", "Record via SDcard" function, when the device settings area is blocked and alarm,
the corresponding way to inform the user.
○
4E A Alarm Input
In the main interface click on the "configuration → Events → Alarm Input" to enter the
Alarming Schedule settings interface.
Arming Schedule
：
As shown in Figure 8-41, you can view, edit, and delete the arming
time of the alarm input. The default is to arm the alarm 24 hours a day. You can adjust the
arming time as follows:
- Method 1: Click the arming time period, manually fill in the start time and end time, set
up and click "Save". If you need to delete the time period, click the "Delete" button
and then reset the time period.
- Method 2: Click the arming time period, two arrows will be displayed at both ends of
the time period. Move the adjustment arrow left or right to adjust the arming time.
- You can set up more than one time period for up to 8 time periods.
- After the day of deployment time is set, if the other time is also needed to set the
same arming time, click the right side of the timeline "
" copy button. In the "copy