User's Manual

- After the day of deployment time is set, if the other time is also needed to set the
same arming time, click the right side of the timeline "
" copy button. In the "copy
to" interface, check the "Select All" or a day, and then Click "OK".
- After setting, click "Save" to complete the setting of the arming time.
Figure 8-39
Linkage Method: Alarm linkage mode upload SMTP and upload FTP regular linkage, as
shown in Figure 8-40:
【
General Linkage
】
Including uploading SMTP and uploading FTP.
【
Upload Via SMTP
】
Select and the system is configured with SMTP, and the alarm
information will be sent to the SMTP recipient mailbox.
【
Upload Via FTP
】
Select and the system is configured with the FTP server, and will send
the alarm information to the FTP server.
【
Upload Via Cloud
】
Select and the system is configured with the Cloud server, and will
send the alarm information to the Cloud server.
【
Record Via SDcard
】
Select and the system is configured with the SDcard record, and
will be recorded to the IP Camera SD card during the video tampering alarm.
 When the arming time is set, there can be no overlap between any two
time periods.