User's Manual

Figure 8-34
【
Enable
】
Turn on / off device motion detection alarm.
Area Settings: Select the area to set the motion detection sensitivity.
【
Select All
】
Motion detection range is to monitor all of the areas, which consist of 396
(22 x 18) small squares.
【
Manually draw the alarm area
】
Move the mouse to the preview screen and click the
left mouse button to select the range of motion detection. Release the left mouse button to
complete the alarm area selection. A camera can select multiple motion detection zones
at the same time.
【
Clear All
】
Clearing all the motion detection areas that were selected.
【
Sensitivity
】
The default is 5, but the range of 0-10 can be chosen. The greater the
value is, the more sensitive the equipment alarm will become.
Arming Schedule
：
As shown in Figure 8-35 below, you can view, edit, and delete the
arming time of motion detection. The default is to arm the alarm 24 hours a day. You can
adjust the arming time as follows:
- Method 1: Click the arming time period, manually fill in the start time and end time, set
up and click Save. If you need to delete the time period, click the "Delete" button and