User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
Light brightness: It is used to adjust the brightness of the light, and the adjustable range
is 0-100.
【
White Balance
】
By default, it is auto. Manually, it is adjustable be it Fluorescent Lamp,
Incandescent, Warm Light, or Natural Light, as shown in Figure 8-29:
Figure 8-29
Manual white balance: It supports Red, Green, and Blue gain adjustments. You can
adjust the range (0-255). When it is done, click "Save".
【
Video Adjustment
】
Here you can turn on and set 2D or 3D digital noise reduction, as
shown in Figure 8-30.
Figure 8-30
【
Image Enhancement
】
Includes flicker control, wide dynamic switch and HDR, as
shown in Figure 8-31.
Figure 8-31
Flicker Control: The flash mode is selected according to the camera installation
environment and the flicker standard. The default setting is PAL (50HZ) shipment.
Sensor Linear WDR
：
The default is Shut Down. You can switch in the drop-down menu