User's Manual

App Client operation example
The following content is introduced by taking the operation of the mobile phone client
(BitVision App) as an example. The steps are as follows:
Step 1:
Use the Android or iOS phone to scan the corresponding QR code to download
and install the BitVision App.
Step 2: Run the client and log in to the account (No account is required to register first).
Step 3: Add devices to the mobile client.
After login, click "Device manage" , "
" and " Add device" , select "SN Add",
enter the device user name, password and verification code after scan the QR code (the
verification code printed on the label), click "Add" to set device note and group, and click
"Send" after adding successfully.
Step 4: Live preview
Select "Real time" and "
" to enter the device list in the main interface. Select the
touching pen and the channel to be previewed in the group. You will see the live video after
clicking "
Done ".
⑤
Cloud
In the main interface, click "Configuration →Network → Advanced Setup → Cloud" to
enter the cloud storage configuration interface, as shown in Figure 8-17 below:
Figure 8-17
【
Cloud Storage Type
】
Select the cloud storage type, Dropbox or Google in the
drop-down menu.
【
Web
】
Depending on the type of cloud storage selection.
【
Auth Code
】
Login cloud web, the verification code will display on the cloud storage
interface, and then copy it in the space.
Fill in the verification code and click on the "Bind" after the success. "User name", "Total
Capacity" and "Used Capacity" will be automatically displayed.