User's Manual

completion of the "test" to ensure that all the correctness of the input information and
network connectivity of the IP camera.
④
P2P
P2P is a private network penetration technology. It does not need to apply for a dynamic
domain name, perform port mapping, or deploy a transit server. You can directly scan the
QR code to download a mobile client. After registering an account, you can add and
manage multiple IP cameras and NVR devices simultaneously on the mobile client.
You can add devices in the following two ways to manage multiple devices.
1) Scan the QR code for the mobile phone system, download the app and register the
account. For details, see the App User Manual on the website.
2) Log on to the P2P platform, register an account, and add the device via the serial
number.
P2P steps are as follows:
Step1: In the main interface, click "Configuration →Network → Advanced Setup → P2P"
to enter the P2P settings interface, as shown in Figure 8-16 below:.
Step2: Make sure that the IP camera accesses the external network and click "
" to
open P2P.
Step 3: Click "Save" to save the configuration.
Step 4: Refresh page -- the status shows "P2P connection successful". This indicates that
P2P is enabled and can be used normally.
Figure 8-16
 The device P2P is enabled by default. To use this function, the device
must be connected to the external network, and the connection status is
displayed as “P2P connection successful”
. Otherwise, it will not work
properly.