User's Manual

【
DDNS Account
】
The input selection type corresponds to the registered account.
【
DDNS Password
】
The input selection type corresponds to the registration password.
【
Confirm Password
】
Re-enter the password and DDNS password.
【
Status
】
Shows whether the DDNS of the current device is set up successfully.
【
Service Type
】
Displays the type of user name.
【
Links to service providers
】
Show service provider information.
②
FTP
Set the FTP (File Transfer Protocol) server and you can store the alarm icon to the FTP
server.
Precondition
You need to purchase or download the FTP service tool and install the software on your
PC.
The steps to configure FTP are as follows:
Step 1: In the main interface, click "Configuration → Network → Advanced Setup →
FTP" to enter the FTP server settings interface, as shown in Figure 8-15.
Step 2: Enter the server address, port, user name, password, and file upload path. Check
"Auto Cover", and select to upload the FTP server file format AVI or JPEG.
Step 3: Click "Save" to save the configuration.
Step 4: Click "Test" to confirm whether the network connection and FTP configuration
automatically create a folder that you named in the FTP storage path.
【
Auto Cover
】
When enabled, the oldest FTP server will be overwritten automatically
when the FTP server is full.
【
Upload Via FTP
】
In the drop-down menu, select FTP file format, JPEG image format
and AVI video for selection. Click on the "Save" after completing the settings.
 Access via DDNS domain requires IP Camera to be accessible to the
Internet.
 To create an FTP user, you need to set the FTP folder write permission;
otherwise the image will not be uploaded successfully.