User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
Figure 8-12
The IP Camera is connected to the routers that have opened the DHCP function. Check
the DHCP option, and the IP camera can automatically get IP address, subnet mask,
default gateway and DNS.
Close DHCP] to manually modify the IP camera IP address, subnet mask, default gateway
and preferred DNS server information. Click "Test" to confirm whether the modified IP
address is available in the LAN (that is, whether it conflicts with other equipment IP).
When it prompts "IP available", click "Save" to complete the settings.
○
2E A Port
In the main interface, click "Configuration →Network → Basic Setup→ Port" to enter the
port setting interface, where you can set the IP Camera network port and protocol port.
The network port has HTTP port (default is 80), RTSP port (default is 554) , HTTPS port
(default is 443), and BITVISION port (default is 6000). The protocol port has the ONVIF
port (default is 8999), as shown in Figure 8-13 below:
Figure 8-13