User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
check the card information, Total Capacity = Residual Capacity, formatted successfully.
○
2E ARec Setup
In the main interface, click "Configuration → System → SDCard → Rec Setup" to enter
the recording setting interface, here you can open the SD card video, set the SD card
recording schedule and stream type, as shown in Figure 8-11:
Figure 8-11
8.3 Network
In the main interface, click "Configuration →Network" to enter the network settings
interface, the network is divided into Basic Setup and Advanced Setup configuration.
8.3.1 Basic Setup
○
1E A TCP/IP
In the main interface, click "Configuration → Network → Basic Setup → TCP / IP" to
enter the TCP / IP interface. Here you can set the IP address, subnet mask, gateway, and
DNS of the device as shown in Figure 8-12 below.