User's Manual

In the System Configuration interface, click "Maintenance" to enter the system
maintenance settings interface, where you can restart the device, restore factory settings,
do manual upgrade, as shown in Figure 8-5:
Figure 8-5
【
Reboot System
】
The IP Camera will restart again automatically after clicking "Reboot
System".
【
Default
】
Divided into Simple recovery and Full recovery.
After clicking “Simple recovery”, IP Camera will automatically restore the parameters to
the factory parameters except the network parameters.
After clicking “Full recovery”, all parameter settings of IP Camera will be automatically
restored to the factory parameter settings (please operate this function carefully).
【
Upgrade
】
Click “Browse” to add upgrade file package, and upgrade the IP Camera
program. (Careful operation must be followed to eliminate errors or else equipment
system may operate abnormally.)