User's Manual

SNTP server address through "Customize".
【
NTP auto-time
】
After it is enabled, IP Camera performs time synchronization with the
SNTP server at the time interval.
【
Time interval
】
The time interval between the IP Camera and the SNTP server is 1
minute by default. You can set "1 ~ 10080".
【
Set Manually
】
To set the IP Camera date and time manually, click on the "Save" after
completing the settings.
【
Synchronize with computer time
】
The IP Camera will synchronize with the computer
time and date that you connect currently. Click on the "Save" after completing the settings.
【
NVR prohibit modification IP Camera time
】
The IP Camera time will not be affected
by the backend storage devices (such as NVR, etc.) after checking this option. The IP
Camera time will run according to the user settings.
○
3E A DST
Daylight saving time (DST) refers to the system of artificially stipulating local time for
energy conservation. The unified time used during the implementation of this system is
called “DST”. In the System Configuration interface, click "DST" to enter the daylight
saving time setting interface, where you can enable daylight saving time, set daylight
saving time, end time and end time, as shown in Figure 8-4:
Figure 8-4
○
4E A Maintenance