User's Manual

【
Device Name
】
The name of the current IP Camera.
【
Firmware Version
】
The current version of the IP Camera.
【
Software Version
】
The current HsIPCCtl control version of the IP Camera.
【
WEB Version
】
The current page version of the IP Camera.
【
Number of Channels】The current channels of the IP Camera; the default is 1.
○
2E A Time Setting
In the System Configuration interface, click "Time Settings" to enter the time setting
interface, where you can set the device time, as shown in Figure 8-3 below:
Figure 8-3
【
Time Zone
】
Displays the current device selection time zone.
【
Time in Camera
】
Displays the current time of the device.
【
NTP
】
The IP Camera time will synchronize with network, and you can change the
different time zones. (This feature requires IP Camera network environment to be
connected to the Internet.) Click on the "Save" after completing the settings.
【
SNTP Sever
】
SNTP server address, including "time.windows.com", "time.nist, gov",
"time-nw.nist.gov", "time-a.nist.gov", "time-b.nist.gov" Optionally, you can also enter the