User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 46 -
SMTP Port
Set port number of SMTP service.
E-mail From
Type the sender’s E-mail address. This address is used for
replying e-mails.
User Name
Type the user name for the SMTP server if authentication is
enabled.
Password
Type the password for the SMTP server if authentication is
enabled.
E-mail To
Type the receiver’s e-mail address.
3.6 Cloud Setting
Refer to this menu to connect the camera to cloud server, so user is able to access the camera
via mobile app. The Android/iOS APP is OKview.
UID
Display the UID (User ID) of the device. Note that user cannot
change it.
Username
Set the username for the cloud server.
Default is admin.
Password
Set the password for the cloud server.
Default is admin.