User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 39 -
3.4.4 OSD & Mask Settings
OSD Settings
Display region of Device Title & Time can be settable.
Video Mask
Settings
Click “Video Mask Settings” to enter the main interface shown below:
Select one region on the image; click “Set” to save this setup.
Click “Query” to check the selected masking region.
Click “Delete All” to delete all Masking regions.
Or select one region, and click “Delete Selected”.
3.5 Networking
Use this menu to configure the network to connect the device and the clients.