User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 38 -
3.4.3 Camera Setting
Brightness
Large value will brighten camera.
Contrast
Large value will contrast camera heavily.
Saturation
Large value will color camera heavily.
Day/Night Mode
There are three modes selectable-- Auto/Day/Night. In the Auto
mode, the camera will change the image quality automatically,
based on the light condition.
Power Frequency
Frequency of power line: 50 or 60Hz.
Mirror Turn the “Mirror” On or OFF.
Rotate Turn the “Rotate” On or OFF.
Enable WDR
WDR Enhancement function strengthens visibility under
extremely bright or dark environments.
Default
Restore to factory image settings.