User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 35 -
Streaming type
Set up the real-time view stream type (Mainstream/Substream).
Fluent or Real-time
Select the video quality: fluent video or real time video.
Turn ON or OFF audio out function. User has to connect an external
active speaker.
Enable audio in function. User has to connect an external active
microphone.
Click this button to display the image in full-screen mode (uses every
available space to display the image captured by this camera).
Click Digital Zoom to activate this function shown below. User can
drag or scale the box over the video to adjust zoom ratio and
position.
Click Snapshot to activate this function. Press the Snapshot button
to take a picture. The image file is saved as JPEG format into your
local PC.
Click Record to activate this function. Press the Record button to
start recording.
3.4 Media Management
Use this menu to set the function of the camera
3.4.1 Video Setting