User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 34 -
When you see this message, click Run to install the required ActiveX control
After the ActiveX control has been installed and run, the first image will be displayed.
You should be able to see the images captured from the Internet camera on the web page now.
For advanced functions, please refer to instructions given in the following chapters.
If you log in the camera as an ordinary user, setting function will be not
available. If you log in the camera as the administrator, you can perform all
the settings provided within the device.
3.3 Live View
Start-up screen will be as follows whether you are an ordinary user or an administrator.
Streaming type
Fluent or Real time