User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 32 -
Chapter 3. Web-based Management
This chapter provides setup details of the IP camera’s Web-based Interface.
3.1 Introduction
The IP camera can be configured with your Web browser. Before configuring, please make
sure your PC is under the same IP segment with Internet camera.
3.2 Connecting to Internet Camera
A. Use the following procedure to establish a connection from your PC to the camera.
B. Once connected, you can add the camera to your browser’s Favorites or Bookmarks.
Start the web browser on the computer and type the IP address of the camera.
The default IP: “http://192.168.0.20
“
Please click the “Download video control” to download the player “ie.exe”
The “ie.exe” is an ActiveX, please install it to login the web management of camera.