User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 24 -
2.4 ActiveX Setup to Use the IP Camera
The IP Camera web pages communicate with the IP camera using an ActiveX control. The
ActiveX control must be downloaded from the IP camera and installed on your PC. Your
Internet Explorer security settings must allow for the web page to work correctly. To use the IP
camera, user must set up his IE browser as follows:
2.4.1 Internet Explorer 6 for Windows XP
From your IE browser ”Tools” ”Internet Options…” ”Security” ”Custom Level…”,
please set up your “Settings” as follows:
Set the first 3 items:
• Download the signed ActiveX controls
• Download the unsigned ActiveX controls
• Initialize and script the ActiveX controls not marked as safe to prompt
1
2
3
4
5
6
7
8