User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Web-based Management
- Device Time Setting
- Adjust
- Manual Setting:
- Click this option to set time and date manually.
- Synchronize with NTP:
- Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).
- Time Zone
- Set the time difference from Greenwich Mean Time in the area where the device is installed.
- Timing Address
- Enter the NTP server IP address.
- Appendix A: Ping IP Address
- Appendix B: Bandwidth and Video Size Estimation
- Appendix C: DDNS Application
- Appendix D: Configuring Port Forwarding Manually
- Appendix E: Power Line Frequency
- Appendix F: Troubleshooting & Frequently Asked Questions
1080p IR Bullet PoE IP Camera
ICA-4460V
- 17 -
2.3 Initial Utility Installation
This chapter shows how to quickly set up your IP camera. The camera is with the default
settings. However to help you find the networked camera quickly, the windows utility PLANET
IP Finder II can search the cameras in the network that can help you to configure some basic
settings before you start advanced management and monitoring.
2.3.1 Installing PLANET IP Finder II
1. Go to PLANET website and download the search tool:
http://planet.com.tw/en/product/images/48611/UT-IP%20Finder%20II_v1.0.zip
2. Unzip and install the PLANET IP Finder II, the “Welcome to the Install Shield Wizard for
PLANET IP Finder II” prompt will display on the screen and click “Next” to continue.